How do i make wood sink? - wood sink
How can I sink standard plywood normal? I'm talking about changing the flow in the timber does not change. Photos of past experience is appreciated
Wednesday, January 13, 2010
Wood Sink How Do I Make Wood Sink?
Subscribe to:
Post Comments (Atom)
2 comments:
Sinks in a liquid? It is easy to fall into the air.
I guess you delete "Attach an anchor" method.
So I guess you need a very light liquid. Oil floats on water, so it is lighter than water. Bet not swim some heavy timber on the water in oil.
In addition, the timber could in time absorb water. If the air bags replaced by water, is likely to fall.
I hope it's a start.
You need a liquid that has a lower density of the wood.
The density of water 1000 kg / m 3 ^
A good estimate of the density of plywood is 600 kg / m 3 ^ Because wood density is lower than water, floats.
So you have a liquid with a density less nickel than the cons here. If you have found this liquid that drops the wood.
See http://www.engineeringtoolbox.com/liquid ... certain density of the liquid. Those that stand out immediately are the following:
Propane: 494 kg / m ^ 3
Ethan: 570 kg / m ^ 3
Butane: 599 kg / m ^ 3
You need the actual density of the opposi-know-plated, then you drink a liquid. Be careful when you use propane, ethane and butane, which are highly flammable.
Post a Comment